Robotic Plasma Cutting & Beam Processing
Coosa Steel provides robotic high-definition plasma cutting for heavy structural steel beams and profiles. With our BeamCut BC25 robotic cutting system, we can cut, cope, bevel, slot, mark and cut-to-length I-beams, HSS, angle, channel and other structural profiles in one automated process, producing precise, fabrication-ready parts while reducing secondary operations.
Our BeamCut BC25 combines a 6-axis robotic system with high-definition plasma technology to automate work that traditionally requires multiple fabrication steps. Designed for heavy structural steel and open profiles, the BC25 can perform layout marking and etching, holes and slots, coping, 3D weld-prep beveling and cut-to-length operations in one continuous workflow, reducing manual layout, handling and fabrication time.
This capability is especially valuable for complex structural components such as stair stringers, where accurate cuts, connection points and layout marks are difficult and time-consuming to produce manually or precisely. The BeamCut system can also mark component locations and part identification directly onto the steel, greatly simplifying fit-up and assembly downstream. For large, heavy structural parts robotic plasma cutting provides an efficient and cost-effective processing option.
- Processing for heavy structural and custom and open profiles
- Beam profiles from 4" × 4" up to 30" × 12"
- HSS up to 12" × 12"
- Angle from 2" × 2" up to 12" × 12"
- Channel from 4" × 2" up to 30" × 12"
- Flat bar from 2" × 3/8" up to 30" × 3"
- T-beams up to 29" × 12"
- 3D weld-prep beveling up to 52°
- Capacity handling up to 600lb/ft
- Automated holes, slots, copes and cut-to-length operations
- Precision layout marking, etching and part identification
- Stair stringers and structural stairs
- Buildings and bridges
- Arenas and stadiums
- Heavy construction
- Heavy I-beam fabrication
- Shipbuilding
- Oil rigs and energy infrastructure
- Platforms, skids and industrial structures
What types of structural steel can Coosa Steel process with the BeamCut BC25?
Our BeamCut BC25 can process I-beams and other beam profiles, HSS, angle, channel, flat bar, T-beams and a variety of custom structural profiles.
Can Coosa Steel cut and process structural I-beams?
Yes. Our BeamCut BC25 is designed for robotic processing of I-beams and other heavy structural profiles, including H-beams, channel, angle, HSS and T-beams. It can perform multiple cutting and fabrication operations in one automated workflow.
Can Coosa Steel process beams for buildings and bridges?
Yes. The BeamCut BC25 is designed for heavy structural profiles used in applications such as commercial buildings, bridges, arenas, stadiums and other structural steel projects.
What operations can robotic plasma cutting perform?
The BC25 can cut parts to length, create holes and slots, cut copes, produce 3D weld-prep bevels and add precise layout markings in one continuous automated workflow.
Is robotic plasma cutting a good option for stair stringers?
Yes. The BC25 can precisely cut stringer geometry, connection features and holes while also marking layout locations, reducing the measuring and manual layout traditionally required during stair fabrication.
Can robotic plasma cutting prepare parts for welding?
Yes. The BC25 can produce 3D weld-prep bevels as part of the same automated workflow used for cutting, coping, holes, slots and marking, reducing the need for separate preparation steps.